How to Fix Your Noisy Garage Door

A garage is one of the handiest and versatile parts of any home. However, since the garage door opens and closes more often, there are higher chances of becoming so noisy and squeaky.

Honestly, a noisy garage-door can be very annoying, not just for you but also for the neighbors. Thankfully, we have this guide on how to fix your noisy garage to help you out. We’ll look at several ways that can help fix your noisy garage doors.

Find The Source Of Noisy Garage Doors

You need to check what exactly is causing your noisy garage doors first before attempting any repair. There are several reasons why your garage-door may be noisy and squeaky. For example, there may be something wrong with the door springs, cables, or even the door itself.

Most homeowners will replace their garage-door instead of trying to fix it. Although this can get quite pricy, repairing your noisy garage-door is not impossible since you’ll only need some simple tools and supplies, including a garage door opener.

However, there’s also a chance that the noise may come from something within your garage. You must check this out before carrying on with repairs or replacements. Alternatively, you can seek professional garage door repair services to help you inspect for the source of the noise.

Quick Fixes For Your Noisy Garage-Doors

Step 1: Oil Them Up

A simple way to start is by oiling up all of your garage-door and its components that might be causing trouble. This will make it move smoothly again without causing additional noise.

If you are going to lubricate the garage-door, be sure that it is safe and clean before doing so. This way, there’s no danger in having your kids play around the garage while you are working on your noisy garage-doors.

Just make sure they stay away from the slippery parts of your garage-door until you’re done with repairs.

Step 2: Tightening Them Up

Garage-doors are built loosely to allow easy opening and closing, but sometimes this causes them to be noisy, especially if the torsion springs and cables become loose or damaged. In addition, this might cause your garage-door to open and close unevenly, which will make it squeak even more.

Here’s what you can do:

1) Make sure that the screws and nails holding your garage-door panels are tight. This will eliminate any squeaking from underneath the garage-door itself or on both sides of it.

2) If there is an issue with your tracks, tighten up the bolts to make them run smoothly again without causing further damage.

Garage-doors are built loosely to allow easy opening and closing, but sometimes this causes them to be noisy, especially if the torsion springs and cables become loose or damaged. In addition, this might cause your garage-door to open and close unevenly, which will make it squeak even more.

Here’s what you can do:

1) Make sure that the screws and nails holding your garage-door panels are tight. This will eliminate any squeaking from underneath the garage-door itself or on both sides of it.

2) If there is an issue with your tracks, tighten up the bolts to make them run smoothly again without causing further damage.

Step 3: Tightening Up The Springs and Cables

Next, make sure that your garage-door’s cables and springs are in good condition. These will play a significant role in how smooth or loud your garage-door is when it opens. Here’s what you need to do:

1) Check the spring bolts that connect each side of your garage-door. Again, make sure that it is in good condition.

If you find out that it has a crack or any damages whatsoever, then replace this immediately to prevent your garage-door from falling apart on its own when an earthquake comes along.

2) You should check the cables too and see if any worn-out spots need to be replaced.

3) And lastly, check out the pulleys if it is making a lot of noise when your garage -door opens or closes. If you find out that there are no issues with these components and still have trouble with your noisy garage-door, then perhaps it’s time for a complete overhaul.

Step 4: Replacing Components

The next step is by far the most challenging part of fixing your noisy garage-door. If you have tried all of these steps and still don’t see any improvement, this might signify that you need to replace parts or even the entire door system. In this case, you may need a garage door opener.

Here are some things that need replacement:

1) The hinges – they are effortless to replace and costs less than $ 50.00 for a set of 4 new ones.

2) The springs – you’ll need to disassemble them before removing the old one and installing the new one; this is a 2-person job, though.

3) And lastly, if the problem persists after all of these steps, then you might need to replace the garage-door itself.

Step 5: Clean It Up

Lastly, don’t forget about your garage’s walls and corners. These are familiar places where dirt collects that can easily scratch and make noise on your garage-door while it opens or closes.

Instead of replacing them right away, clean up those walls and corners first. This way, you can avoid having to spend on a new door altogether.

Step 6: Fix Your Garage-Door From the Inside

Other things can be done from the inside of your house to make sure that your noisy garage-doors stay in good condition too.

Here’s what you need to do:

1. Tighten up the screws

If there are any issues with your door’s hinges, then tighten up those screws as well and make sure that it doesn’t move anymore. This will eliminate most of its issues regarding doors being loose. And this is a straightforward fix to try before you spend on new parts or even a new garage-door.

2) The rollers

If you find out that the issue is coming from your garage’s roller track, clean it up and make sure that there are no issues with any of its components. This simple step will remove most of the squeaking sound coming from your door when you open or close it.

3) Look for the tracks

If your issue is coming from the garage’s door tracks, then it’s best to contact a professional as this can be dangerous since there are high chances that you’ll get hurt.

Here’s what you need to look for:

A) Check the rollers’ bearings which usually sit at the end of the track. They also move up and down with the garage-door when it opens or closes.

B) If your issue is coming from the track itself, you need to make sure that there are no obstructions between them.

You can do this by removing the railings or the horizontal components of it. And lastly, check out each part and see if there are any damages or holes that need to be patched up.

Again, if you have tried doing all of these steps and it still doesn’t work, you might want to look for professional help from a reputable garage door repair company like Swift Garage Door Repair LLC.

They can determine which part is faulty and replace them right away. In case your garage door has a severe fault and needs replacement, then you can look for garage door repair services near you. Go to the web and search them up!

If you don’t want to do the repairs yourself, call Swift Garage Door Repair LLC for professional door repair services. They can help you determine which part needs replacement and install them right away.